231 Front Street, Business

Practical and Helpful Tips: Printing

How to Refill Your Toner in Steps With the advancement in the technology word, printing has gone a step higher. This is mainly because of the introduction of laser printer toner. You should always refill your toner when your printing starts to fail. Some people always tend to think that their cartridge is worn out but it is their toner that is out. Cartridges are manufactured in such a way that they will wear out after some years. If you want your cartridge to last longer, the secret is always to know the right time when you are supposed to add the toner. This will help to extend its life. This is because each cartridge is made to work with a specific weight, gain size and chemical type toner. These are the specifics that will only work with that cartridge and not work with any other than the provided one. Knowing how to add the toner is another thing you have to know. This is why you need to know the steps on how to refill the toner. The are the following steps. With your toner at hand, you will first of all need to locate or make the fill hole. Each and every cartridge has got a holding tank which holds the toner powder. Some of them have got refill holes but others do not. There are also instruction guides on the refill kit on how you can do it. You will have to create a hole on your cartridge if it does not have a fill hole. Do not just do it anywhere because you might end up destroying it. Often at times the hole is supposed to be created in either ends and not in the middle, mostly the side that faces up. The toner comes with the specific cartridge that it can work with. This is where the second step come in. You now need to pour the toner. You should read the instructions on it and make sure that it is the right one. Check on some details like the expiry date just to confirm that you are pouring a good toner. For you not to spill the toner, use the funnel that you are to fit in the toner cup.
Where To Start with Printing and More
Releasing the fill hole is the last and final step. If your cartridge is that which has a hole, you will have to return the cup to cover the hole. Cartridges that you make holes in them before the refill comes with a specific aluminum plate that you will use for that particular job. You will use the tape to cover the hole. You will then gently shake the cartridge to evenly distribute the toner. You will now reinsert tit to the printer and start printing once gain.Lessons Learned About Services